What is an injector?
An injector is a fuel injector that injects fuel, air and pressurized water vapor into the cylinder. Fueling in cars is done in two ways, in older cars, the carburetor performed the task of fueling the car’s engine, i.e. it injected the mixture of air and fuel into the engine for ignition, these cars were called carburetor cars, but in today’s cars There is an injection fuel system.
The injection fueling system is much more accurate and complete than the carburetor fueling.
In the injection system, fueling is done by a valve, which is electronically controlled by the active brain of the car, the ECU. Injectors are an important part in today’s cars, and their correct operation is very important.
There are injectors in every car as many cylinders as these injectors do the work of injecting fuel into the cylinder and the injection of fuel must be done uniformly, in this way all the injectors of a car must be healthy and clean because the presence of a dirty injector can Affect the performance of the car.
Your car’s injectors get dirty over time and may even get blocked. This problem is more common in cars that travel on short routes and within the city, because frequent switching on and off increases the risk of injector blockage.
Poor and inappropriate fuel quality causes problems and damages in this important part of the car, in such a way that the particles and impurities of the gasoline consumed in the car penetrate the fuel system over time and cause the deposition of particles in the injector parts, deposits that are carbon based. have.
When these deposits increase, the performance of your car’s injector system will gradually change and it will not have its original efficiency.
For example, the angle of fuel and air injection changes or other things that cause the car engine to not work properly and have problems.
In order to improve the performance of the car engine and reduce the car’s emissions, the injector needles must be clean. When these needles become dirty over time due to deposits, fuel injection will not be done properly and problems such as ripping will occur. Therefore, the injectors need to be washed and cleaned so as not to cause an error in the ECU and turn on the car’s check light.
In our country, the useful life of the injector is as long as it is healthy, that is, it cannot be replaced until it breaks down.
In the maintenance of the injector, it is said that washing the injector once every four months will make it use optimally.
Injector washing
There are different ways to wash the injector, as well as reviving the performance of the car engine, increasing the engine power and removing deposits from gasoline particles and impurities, from the simplest way, which is the use of injector wash supplement solutions, to the more complicated way. , means opening the injectors and washing them..
Naturally, according to the amount of deposits and clogging of the injectors, you can choose the right way to clean them. Using injector washing solutions is a simple way that costs less, but it is not effective for a lot of injector deposits. When the injectors are very dirty, the injectors should be opened and washed. Well, this is more expensive than using injector cleaning solutions, so it is better not to spend more money, although when using injector cleaning solutions, it is better to open We don’t have to remove the injectors and wash them and bear additional costs.
If drivers use the right injector based on their car, this will have a significant impact on maintaining the health and longevity of the engine, as well as reducing emissions and fuel consumption.
Advantages of using injector wash
The use of injector washing by removing sediments and pollution makes the fuel supply better and increases the life of the fuel supply system, on the other hand, it increases the power and acceleration of the engine.
